Pre-packed product to ensure perfect proportion of mixing, excellent waterproofing characteristics, excellent adhesion, flexible and thicker layer, large section waterproofing system. Excellent thermal insulation and anti-carbonation properties. Anti-fungal characteristics.
Two part (powder+ liquid LV), pre-packed, acrylic polymer modified, cementitious, large section waterproof coating in white colour with additional benefits of insulating and anti-carbonation properties.
One extra coat of LEAKGUARD-C MICRO is recommended on the junctions and joints especially parapet wall bottom joints on rooftops. Slight water sprinkling on the first coat is recommended before starting second and subsequent coats.
ADDITIONAL INFORMATION :- ADMIX FLO SR is high solid liquid product. Hence proper stirring is required to get optimum results. It is therefore requested to stir / shake well before every use.
QUALITY ASSURANCES :- CCI Inc., is an ISO 9001-2015 certified company and our products are in accordance with international standards.
Pre-packed product to ensure perfect proportion of mixing, excellent waterproofing characteristics, excellent adhesion, flexible and thicker layer, large section waterproofing system. Excellent thermal insulation and anti-carbonation properties. Anti-fungal characteristics.
LEAKGUARD-C MICRO is packed in two separate components in 9 kg powder and 5 ltr liquid LV.
All concrete structures like Roof tops, basements, water tanks, swimming pools, retaining walls, slope roofs etc. Prevents from fungus. LEAKGUARD-C MICRO can also be used for coatings on asbestos sheets and to fill & cover hair line cracks even up to 5mm on large section areas of both horizontal as well as vertical surfaces. Used for insulation properties and protects the structure from carbonation.
Surface preparation : Surface should be cleaned thoroughly by using wire brush and all loose particles, oil stains if any, dust, paint etc., should be removed and cleaned by sufficient quantity of water. Un-plastered, un-even surfaces or any cracks on the surface should be repaired to make it even for better bonding. Surface should be strong & sound.
Application : The prepared surface should be sufficiently wet and water stagnation if any, should be removed. Then mixed
LEAKGUARD-C MICRO to be applied uniformly by brush both vertical and horizontal directions, one by one. Two coats are recommended.
LEAKGUARD-C MICRO can be stored in original sealed pack under shade in dry condition for 24 months.
