Two part (powder + liquid), pre-packed, acrylic polymer modified (styrene acrylic based), fibre reinforced, cementitious waterproof coating.
ADDITIONAL INFORMATION :-One extra coat of LEAKGUARD-C (F) is recommended on the junctions and joints especially parapet wall bottom joints on rooftops. Slight water sprinkling on the first coat is recommended before starting second and subsequent coats.
QUALITY ASSURANCES :- CCI Inc., is an ISO 9001-2015 certified company and our products are in accordance with international standards.
Pre-packed product to ensure perfect proportion of mixing, excellent waterproofing characteristics, excellent adhesion, flexible, fibre reinforced for crack free layer, enhanced strength & cost effective waterproofing system.
LEAKGUARD-C (F) is packed in two separate components in 9 kg powder and 5 ltr liquid.
All concrete structures like Roof tops, basements, water tanks, sunken slabs, swimming pools, retaining walls, slope roofs etc. LEAKGUARD-C(F) can also be used for coatings on asbestos sheets.
Surface preparation: Surface should be cleaned thoroughly by using wire brush and all loose particles, oil stains if any, dust, paint etc., should be removed and cleaned by sufficient quantity of water. Un-plastered, un-even surfaces or any cracks on the surface should be repaired to make it even for better bonding. Surface should be strong & sound.
Application: The prepared surface should be sufficiently wet and water stagnation if any, should be removed. Then mixed LEAKGUARD-C (F) to be applied uniformly by brush both vertical and horizontal directions, one by one. Two or three coats are recommended.
LEAKGUARD-C(F) can be stored in original sealed pack under shade in dry condition for 24 months.
