Single pack, easy to use, high strength, water proofed, expanding characteristic, crack filling compound in grey colour.
BENEFITS :-Better consistency, easy to use, excellent adhesion, water proofing & expanding characteristic, non-metallic and chloride free.
QUALITY ASSURANCES :- CCI Inc., is an ISO 9001-2015 certified company and our products are in accordance with international standards.
The cracked area should be ‘A’ grooved. The surface should be widened (depth and width) to ensure proper repair and filling the cracks uniformly.
All the debris and loose particles from the groove mouth be removed and pre-wet the surface with water. Pre-wetting the surface is a MUST. Apply by brush ADMIX SB LATEX on the wet surface of groove as a primer.
Mix CRACKSEALER-G with water and ADMIX SB LATEX at 1:1 ratio. The addition of water (water/powder ratio), vary from place to place due to temperature and humidity. Therefore water should be used to mix CRACKSEALER-G till a homogenous or a semi-paste consistency is formed.
Place the mixed CRACKSEALER-G deep into the grooved gap by a putty blade, allow it to get filled the area uniformly and finish it off.
5kg bags
WATER CURING
CRACKSEALER-G has expanding characteristics to ensure perfect bond on both the sides of cracks and hence proper water curing is necessary. Water curing should be started after 2 hours of its application for smooth expansion and perfect bond. It is advised to cure the area with water 3 to 4 times a day for 2 days.
PRIMING IN LIEU OF WATER CURING
Immediately after CRACKSEALER-G application, apply one cover coat with ADMIX SB LATEX to enable CRACKSEALER G to set without evaporating water.
Minimum 6 months from the date of manufacture if stored in original container under shade, unopened.
